TeeJet Electromagnetic Flow Meter FM9380-F75

TeeJet Electromagnetic Flow Meter FM9380-F75

• No flow obstructions = no clogging risk
• No moving parts means no service or maintenance requirements
• Fast response times improves performance of regulating systems
• Works with any conducting fluid
• Clean-sheet design optimized for agricultural application equipment
• Optimized design balances excellent low flow performance with low pressure loss at high flow rates
• Unaffected by changes in fluid temperature, density, viscosity, concentration and electrical conductivity

• Lifetime factory calibration - no field calibration needed
• Convenient TeeJet 75 series/Banjo 200 series flange connections
• LED indicators for power and flow signal
• Extremely wide 166:1 flow range
• CE Certified

• Rated Flow Range 0.6 to 100 GPM / 2.3 to 380 LPM
• Accuracy +/- 2% of reading between >1.0 GPM to 100 GPM / 3.8 LPM to 380 LPM +/- 5% of reading between 0.6 GPM to 1.0 GPM / 2.3 LPM to 3.8 LPM
• Pressure Drop 4 PSI @ 100 GPM / 0.276 bar @ 380 LPM
• Pressure Rating 200 PSI / 14 bar
• Calibration Number 1,500 pulses per gallon / 396 pulses per liter
• Fluid Requirements Water based with conductivity >50 μs/cm
• Inlets / Outlets TeeJet F75 Series Flange
• Materials Polypropylene, 300 series stainless steel, Viton seals
• Temperature Rating Operating: 32°F to +140°F / 0°C to +60°C Storage: -40°F to 185°F / -40°C to +85°C
• Voltage 4.5 to 16 VDC
• Current <1 amp
• Output 50% Square Wave, NPN with a 10K pull-up resistor
• LEDs Green — Power Flashing Orange — Flow 1 Hz @ 0.6 to 3 GPM / >2.3 to 11.4 LPM 3 Hz @ >3 to 15 GPM / >14.4 to 56.8 LPM 10 Hz @ >15 to 100 GPM / >56.8 to 380 LPM
• Size 6.3″ x 4.1″ x 3.1″ / 160 mm x 105 mm x 78 mm
• Maximum Free Passage 0.58″ / 14.7 mm
• Equivalent Flow Diameter 0.85″ / 21.6 mm
• Weight 1.2 lbs / 0.5 kg
• Ingress Protection IP67